Confirm your delivery address and we will show you the correct prices for that destination.
STAGES PRODUCES POWER METERS FOR DRIVETRAIN MANUFACTURERS ACROSS MANY CYCLING DISCIPLINES. EXPLORE OUR PRODUCT LINE USING THE FILTERS BELOW TO FIND THE POWER METER THAT’S RIGHT FOR YOU.
Stages has soared to prominence and plaudits in only a few short years thanks to its exceptional power meters, which offer everything both recreational riders and top professionals need without the complexity and high cost of many competitor's units.
The Boulder, Colorado, based company's beginnings were in creating power meters for gym bikes, which led to the concept of a smaller, lighter, simpler and less expensive power measurement device for cyclists of all levels to get more out of their training.
A desire for simplicity didn't preclude Stages from seeking innovation; the company ushered in many firsts to the world of power meters that left more established brands scrambling to catch up.
Today, the U.S. brand's Stages LR units are the pinnacle of power meter technology, while the combination of individual left and right-hand power meter units offers riders a simple upgrade path to two-leg data capture.
The new single-sided Stages Power L meter is built on to a non-drive-side Shimano 105 5800 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’’s best product proving ground, then Stages Power is proven as the world’’s best power meter. Active Temperature Compensation as standard equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results Each Stages Power meter is calibrated individually to ensure a +/- 1, 5% accuracy level, which is an industry best for non-scientific power meters. Specifications Accuracy +/- 1, 5% accurate in all conditions Power meter housing low profile design, with robust door interface. Tool free battery replacement on the left arm Weight Only adds 15g to base crank set Battery life 200+ hours (coin cell: CR2032) when used as a single sided meter Power range (Watts) 0 - 2500 Cadence range (rpm) 20 - 220 Water resistance rating IPX7 Options Crank length 165mm, 170mm, 172.5mm, 175mm Additional Features Active temperature compensation Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon) Wirelessly upgradable firmware LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit Updated accelorometer and addition of gyroscope for improved cadence resolution NFC tap to pair for some phones and devices Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Compatibility Crank Compatibility Compatible with all Shimano Hollowtech II road drive side crank arms. Frame Compatibility Most frames, see fit guide in our Support section Software Compatibility Stages Link, Training Peaks, Strava, Garmin Training Center and others DeviceCompatibility ANT+, Bluetooth Smart Ready In the Box Power meter High quality CR2032 coin cell battery Lifetime access to Stages Link for power meter management and firmware upgrade 2 months free access to Stages Link premium training and coaching features Product Identification Card with Serial Number and ANT+ ID Number User Guide
The new single-sided Stages Power L meter is built on to a non-drive-side Shimano 105 5800 crank arm and is compatible with all Shimano Hollowtech II road drivetrains. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’’s best product proving ground, then Stages Power is proven as the world’’s best power meter. Active Temperature Compensation as standard equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions. Individual meter calibration for the most accurate results Each Stages Power meter is calibrated individually to ensure a +/- 1, 5% accuracy level, which is an industry best for non-scientific power meters. Specifications Accuracy +/- 1, 5% accurate in all conditions Power meter housing low profile design, with robust door interface. Tool free battery replacement on the left arm Weight Only adds 15g to base crank set Battery life 200+ hours (coin cell: CR2032) when used as a single sided meter Power range (Watts) 0 - 2500 Cadence range (rpm) 20 - 220 Water resistance rating IPX7 Options Crank length 165mm, 170mm, 172.5mm, 175mm Additional Features Active temperature compensation Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon) Wirelessly upgradable firmware LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit Updated accelorometer and addition of gyroscope for improved cadence resolution NFC tap to pair for some phones and devices Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength Compatibility Crank Compatibility Compatible with all Shimano Hollowtech II road drive side crank arms. Frame Compatibility Most frames, see fit guide in our Support section Software Compatibility Stages Link, Training Peaks, Strava, Garmin Training Center and others DeviceCompatibility ANT+, Bluetooth Smart Ready In the Box Power meter High quality CR2032 coin cell battery Lifetime access to Stages Link for power meter management and firmware upgrade 2 months free access to Stages Link premium training and coaching features Product Identification Card with Serial Number and ANT+ ID Number User Guide
The Stages Power meter for Shimano´s Ultegra R8000 crank set is available as Stages Power L (left-sided only), Stages Power LR (dual-sided) and Stages Power R (right-sided only) option.
Stages Power L
Built on to a non-drive side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.
Stages Power LR
Built on to a Shimano Ultegra R8000 crank set, placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs.
Stages Power R
Built on to a drive side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.
Tour Proven
Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment
Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions.
Individual meter calibration for the most accurate results
Each Stages Power meter is calibrated individually to ensure a +/- 1, 5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation.
Stages Power R drive-side meter for added compatibility or upgrading an existing Stages Power L meter to Stages Power LR
While not widespread there are some key bicycle models that are not compatibile with the non-drive crank arm based Stages Power meter because of interference with the power meter housing, for example Cervelo's P5 and many bikes with chainstay mounted brake calipers. Stages Power R offers increased compatibility with these models as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR (dual) meter systems.
Specifications
Accuracy
+/- 1, 5% accurate in all conditions
Power meter housing
low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head screw access on the drive side
Weight
Only adds 35g (Stages Power LR) / 15g (Stages Power L) / 20g (Stages Power R) to base crank set
Battery life
175+ hours (Stages Power LR, via 2 coin cell: CR2032), 200+ hours (coin cell: CR2032) when used as a single sided Stages Power L or Stages Power R meter
Power range (Watts)
0 - 2500
Cadence range (rpm)
20 - 220
Water resistance rating
IPX7
Options
Stages Power L
Crank length 165mm, 170mm, 172.5mm, 175mm
Stages Power LR
Crank length 165mm, 170mm, 172.5mm, 175mm
Chainrings 50/34, 52/36, 53/39
Stages Power R
Crank length 165mm, 170mm, 172.5mm, 175mm
Chainrings 50/34, 52/36, 53/39
Additional Features
Active temperature compensation
Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)
Wirelessly upgradable firmware
LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit
Updated accelorometer and addition of gyroscope for improved cadence resolution
NFC tap to pair for some phones and devices
Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength
Compatibility
Stages Power L
Compatible with all Shimano Hollowtech II road drive side crank arms.
Stages Power LR
Compatible with all Shimano Hollowtech II, 11-speed, road drivetrains.
Stages Power R
Compatible with all Shimano Hollowtech II road left arms.
Frame Compatibility
Most frames, see fit guide in our Support section
Software Compatibility
Stages Link, Training Peaks, Strava, Garmin Training Center and others
DeviceCompatibility
ANT+, Bluetooth Smart Ready
In the Box
Stages Power L
Non-drive-side power meter
High quality CR2032 coin cell battery
Stages Power LR
Non-drive-side power meter
Drive-side power meter
Shimano chainrings
2x high quality CR2032 coin cell battery
Stages Power R
Drive side power meter
Shimano chainrings
High quality CR2032 coin cell battery
Lifetime access to Stages Link for power meter management and firmware upgrade
2 months free access to Stages Link premium training and coaching features
Product Identification Card with Serial Number and ANT+ ID Number
User Guide
The Stages Power meter for Shimano´s Ultegra R8000 crank set is available as Stages Power L (left-sided only), Stages Power LR (dual-sided) and Stages Power R (right-sided only) option.
Stages Power L
Built on to a non-drive side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.
Stages Power LR
Built on to a Shimano Ultegra R8000 crank set, placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs.
Stages Power R
Built on to a drive side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.
Tour Proven
Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment
Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions.
Individual meter calibration for the most accurate results
Each Stages Power meter is calibrated individually to ensure a +/- 1, 5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation.
Stages Power R drive-side meter for added compatibility or upgrading an existing Stages Power L meter to Stages Power LR
While not widespread there are some key bicycle models that are not compatibile with the non-drive crank arm based Stages Power meter because of interference with the power meter housing, for example Cervelo's P5 and many bikes with chainstay mounted brake calipers. Stages Power R offers increased compatibility with these models as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR (dual) meter systems.
Specifications
Accuracy
+/- 1, 5% accurate in all conditions
Power meter housing
low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head screw access on the drive side
Weight
Only adds 35g (Stages Power LR) / 15g (Stages Power L) / 20g (Stages Power R) to base crank set
Battery life
175+ hours (Stages Power LR, via 2 coin cell: CR2032), 200+ hours (coin cell: CR2032) when used as a single sided Stages Power L or Stages Power R meter
Power range (Watts)
0 - 2500
Cadence range (rpm)
20 - 220
Water resistance rating
IPX7
Options
Stages Power L
Crank length 165mm, 170mm, 172.5mm, 175mm
Stages Power LR
Crank length 165mm, 170mm, 172.5mm, 175mm
Chainrings 50/34, 52/36, 53/39
Stages Power R
Crank length 165mm, 170mm, 172.5mm, 175mm
Chainrings 50/34, 52/36, 53/39
Additional Features
Active temperature compensation
Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)
Wirelessly upgradable firmware
LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit
Updated accelorometer and addition of gyroscope for improved cadence resolution
NFC tap to pair for some phones and devices
Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength
Compatibility
Stages Power L
Compatible with all Shimano Hollowtech II road drive side crank arms.
Stages Power LR
Compatible with all Shimano Hollowtech II, 11-speed, road drivetrains.
Stages Power R
Compatible with all Shimano Hollowtech II road left arms.
Frame Compatibility
Most frames, see fit guide in our Support section
Software Compatibility
Stages Link, Training Peaks, Strava, Garmin Training Center and others
DeviceCompatibility
ANT+, Bluetooth Smart Ready
In the Box
Stages Power L
Non-drive-side power meter
High quality CR2032 coin cell battery
Stages Power LR
Non-drive-side power meter
Drive-side power meter
Shimano chainrings
2x high quality CR2032 coin cell battery
Stages Power R
Drive side power meter
Shimano chainrings
High quality CR2032 coin cell battery
Lifetime access to Stages Link for power meter management and firmware upgrade
2 months free access to Stages Link premium training and coaching features
Product Identification Card with Serial Number and ANT+ ID Number
User Guide
The Stages Power meter for Shimano´s Ultegra R8000 crank set is available as Stages Power L (left-sided only), Stages Power LR (dual-sided) and Stages Power R (right-sided only) option.
Stages Power L
Built on to a non-drive side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.
Stages Power LR
Built on to a Shimano Ultegra R8000 crank set, placed on both the drive and non-drive side of the crank in order to independently measure a rider's left and right legs.
Stages Power R
Built on to a drive side Shimano Ultegra R8000 crank arm and is compatible with all frames that fit Shimano Hollowtech II cranks.
Tour Proven
Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world’s best product proving ground, then Stages Power is proven as the world’s best power meter.
Active Temperature Compensation as standard equipment
Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process ensuring accurate readings no matter the environmental conditions. ATC is the key reason a rider can trust data from Stages Power in all conditions.
Individual meter calibration for the most accurate results
Each Stages Power meter is calibrated individually to ensure a +/- 1, 5% accuracy level, which is an industry best for non-scientific power meters. Individual calibration means that you can trust the bi-lateral data produced by our system, as it's a real measurement and not an estimation.
Stages Power R drive-side meter for added compatibility or upgrading an existing Stages Power L meter to Stages Power LR
While not widespread there are some key bicycle models that are not compatibile with the non-drive crank arm based Stages Power meter because of interference with the power meter housing, for example Cervelo's P5 and many bikes with chainstay mounted brake calipers. Stages Power R offers increased compatibility with these models as well as the ability to upgrade existing Stages Power L power meters to Stages Power LR (dual) meter systems.
Specifications
Accuracy
+/- 1, 5% accurate in all conditions
Power meter housing
low profile design, with robust door interface. Tool free battery replacement on the left arm and phillips head screw access on the drive side
Weight
Only adds 35g (Stages Power LR) / 15g (Stages Power L) / 20g (Stages Power R) to base crank set
Battery life
175+ hours (Stages Power LR, via 2 coin cell: CR2032), 200+ hours (coin cell: CR2032) when used as a single sided Stages Power L or Stages Power R meter
Power range (Watts)
0 - 2500
Cadence range (rpm)
20 - 220
Water resistance rating
IPX7
Options
Stages Power L
Crank length 165mm, 170mm, 172.5mm, 175mm
Stages Power LR
Crank length 165mm, 170mm, 172.5mm, 175mm
Chainrings 50/34, 52/36, 53/39
Stages Power R
Crank length 165mm, 170mm, 172.5mm, 175mm
Chainrings 50/34, 52/36, 53/39
Additional Features
Active temperature compensation
Accelerometer based cadence measurement or the option to use a Hall-Effect based system with magnet (coming soon)
Wirelessly upgradable firmware
LED indicator for visual indication of battery levels and zero reset confirmation without connected app or headunit
Updated accelorometer and addition of gyroscope for improved cadence resolution
NFC tap to pair for some phones and devices
Upgraded BLE and ANT+ radios offer a 6x improvement of data transmission strength
Compatibility
Stages Power L
Compatible with all Shimano Hollowtech II road drive side crank arms.
Stages Power LR
Compatible with all Shimano Hollowtech II, 11-speed, road drivetrains.
Stages Power R
Compatible with all Shimano Hollowtech II road left arms.
Frame Compatibility
Most frames, see fit guide in our Support section
Software Compatibility
Stages Link, Training Peaks, Strava, Garmin Training Center and others
DeviceCompatibility
ANT+, Bluetooth Smart Ready
In the Box
Stages Power L
Non-drive-side power meter
High quality CR2032 coin cell battery
Stages Power LR
Non-drive-side power meter
Drive-side power meter
Shimano chainrings
2x high quality CR2032 coin cell battery
Stages Power R
Drive side power meter
Shimano chainrings
High quality CR2032 coin cell battery
Lifetime access to Stages Link for power meter management and firmware upgrade
2 months free access to Stages Link premium training and coaching features
Product Identification Card with Serial Number and ANT+ ID Number
User Guide
Confirm your delivery address and we will show you the correct prices for that destination.