Confirm your delivery address and we will show you the correct prices for that destination.
| 0 items | € 0 |
Ever wanted to build your dream bike without having a bottomless pit as your budget? If so, I think you will find JRC products quite fitting to your requirements.
Through rigorous design and testing, we bring to you one of the very best seatposts in the world. Our goal was to produce a durable, ultra-lightweight seatpost without the extortionate price tag seen on almost every other seatpost of similar specification. Our results were striking; concluding with total weight from as little as a mere 103grams (250mm* 27, 2mm).
Our Kokoro seatpost features varying wall density enabling us to lessen the layers of carbon in areas of low stress levels while ensuringmaximum durability through increased wall thickness in areas of higher stress. The intricate tube design enables us to manufacture carbon tubes up to 50% lighter than most competitors without any compromise in strength or stiffness levels.
When seated, weight distribution on the front and the rear of a seatpost is unequal and bearing this consideration in mind we also took the time to test loads. The results meant we opted for slightly thicker walls on the front of the cradle and the frontal yoke.
Features:
-Varying Layer thickness with internal carbon reinforcement rings to help carry clamping force and prevent seatpost slippage
-CNC Precision Machined Titanium Bolts
-CNC Machined 7075 Cradle drilled to further reduce the weight
-CNC Machined 7075 Yokes and shaft
Additional information:
-The seatpost features minimum and maximum insert lines to further reduce the weight.Min & Max lines are measured in millimetres from the saddle rails:
250mm:
Maximum Insert: 130mm
Minimum Insert: 180mm
-Exact Weight. Tolerance is no more than +/- 1%
250mm:
27.2mm diameter: 104grams
31.6mm diameter: 111grams
-Max Rider Weight:
Road cycling: No Limit
XC: 95kg Maximum
not suitable for other off-road riding*
-Recommended Torque:
Saddle rail Bolts: 3nm
Seatpost Clamp: 5-6nm
Fits all Garmin Edge Models (except 1000) Also Compatible with other computers including Bryton Rider 20, 21, 30, 35 & 40 & Miocomputers Compatible with Tri-Bars with quick setup by twisting the UI 90 degrees All JRC mounts come with a 1 year warranty Spacers included to fit all handlebar sizes; 31.8, 25.4 & 22.2mm Weight: 25grams, extremely lightweight.
Fits all Garmin Edge Models (except 1000) Also Compatible with other computers including Bryton Rider 20, 21, 30, 35 & 40 & Miocomputers Compatible with Tri-Bars with quick setup by twisting the UI 90 degrees All JRC mounts come with a 1 year warranty Spacers included to fit all handlebar sizes; 31.8, 25.4 & 22.2mm Weight: 25grams, extremely lightweight.
Fits all Garmin Edge Models (except 1000) Also Compatible with other computers including Bryton Rider 20, 21, 30, 35 & 40 & Miocomputers Compatible with Tri-Bars with quick setup by twisting the UI 90 degrees All JRC mounts come with a 1 year warranty Spacers included to fit all handlebar sizes; 31.8, 25.4 & 22.2mm Weight: 25grams, extremely lightweight.
Fits all Garmin Edge Models (except 1000) Also Compatible with other computers including Bryton Rider 20, 21, 30, 35 & 40 & Miocomputers Compatible with Tri-Bars with quick setup by twisting the UI 90 degrees All JRC mounts come with a 1 year warranty Spacers included to fit all handlebar sizes; 31.8, 25.4 & 22.2mm Weight: 25grams, extremely lightweight.
Fits all Garmin Edge Models (except 1000) Also Compatible with other computers including Bryton Rider 20, 21, 30, 35 & 40 & Miocomputers Compatible with Tri-Bars with quick setup by twisting the UI 90 degrees All JRC mounts come with a 1 year warranty Spacers included to fit all handlebar sizes; 31.8, 25.4 & 22.2mm Weight: 25grams, extremely lightweight.
Fits all Garmin Edge Models. Manufactured to deal with the additional weight of mounting go-pro & similar cameras (cnc aluminium camera mounts sold separately) Also Compatible with other computers includingBryton Rider 20, 21, 30, 35 & 40 & Miocomputers Compatible with Tri-Bars with quick setup by twisting the UI 90degrees All JRC mounts come with a 1 year warranty Spacers included to fit handlebar sizes; 31.8 & 25.4 Weight: 25grams, extremely lightweight
Fits all Garmin Edge Models. Manufactured to deal with the additional weight of mounting go-pro & similar cameras (cnc aluminium camera mounts sold separately) Also Compatible with other computers includingBryton Rider 20, 21, 30, 35 & 40 & Miocomputers Compatible with Tri-Bars with quick setup by twisting the UI 90degrees All JRC mounts come with a 1 year warranty Spacers included to fit handlebar sizes; 31.8 & 25.4 Weight: 25grams, extremely lightweight
Fits all Garmin Edge Models. Manufactured to deal with the additional weight of mounting go-pro & similar cameras (cnc aluminium camera mounts sold separately) Also Compatible with other computers includingBryton Rider 20, 21, 30, 35 & 40 & Miocomputers Compatible with Tri-Bars with quick setup by twisting the UI 90degrees All JRC mounts come with a 1 year warranty Spacers included to fit handlebar sizes; 31.8 & 25.4 Weight: 25grams, extremely lightweight
Confirm your delivery address and we will show you the correct prices for that destination.
